|
Axis Developer Documentation (ETRAX 100LX)
These documents apply to products based on ETRAX 100LX and
the ETRAX 100LX MultiChip Module (MCM). If you are using a product based on the older ETRAX
100 chip, please check here.
These documents mostly concern Axis specific hardware and
software. If you are looking for more general information
about Linux development, take a look at our recommended
reading section. Step by step guide to
development
| Get the developer board
running |
|
The first step is to get
your developer board up and running. There are small
differences between the different boards. Follow these
guides:
You should read this guide about setting the IP
address on the boards:
FAQ regarding IP
address setting on the board
|
| Install the SDK |
|
The next step is to install
your development environment on your Linux workstation.
|
| Learn to develop on the
ETRAX platform |
|
We have written some guides
about application and driver development on the ETRAX
platform. It is also recommended that you take a look at
the recommended
reading links.
Application programming
Device driver
programming
|
| Reference |
|
Software Tools
|
A great deal of effort has gone into making this
documentation as correct as possible. The information here is
provided "as is", without warranty or guarantee of
any kind. To be on the safe side, always contact
us if you are in doubt. |
