|
Pre-compiled Firmware Images
This page contains precompiled firmware
images for the most common AXIS products. These images are
compiled with the default settings. If you can not find an
image for your hardware or if you would like to use a custom
configuration you have to compile the image yourself.
Instructions on how to build a custom image can be found in
the
documentation section.
These gziped files contain the image file (fimage) and a
tablespec file. The tablespec file is needed when using the
flashit or flashitall scripts. To flash
your developer board with one of these images follow the
How to Flash
upgrade guide.
NB Not all firmware images can be
upgraded without rewriting the whole flash. Regarding the
factory default images this is valid for the developer board
LX and for developer board/device server 82/83. To write the
whole flash use network boot method with the flashitall script
or ftp flashing with the flash_all target. Observe that the
latter is not functional for developer board LX prior to
release 2.2.0 and developer board 82 prior to release 1.92.
For more information consult the
trouble reports page in the
Axis
Developer Wiki.
Downloads
| Product |
SDK releases |
| Developer board 82+ |
[2.01 - 2.1 MB]
[1.92 - 1.8 MB]1 |
| Developer board 82 |
[2.01 - 2.1 MB]
[1.91 - 1.8 MB]1 |
| Developer board LX |
[2.01 - 1.8 MB]
[2.20 - 1.4 MB]1, 2 |
1 The factory default firmware image.
2 This is an old firmware (older than the 2.01) despite the higher version number. Read more about the version numbers on the release history page.
|
