|
AXIS 82+ Developer Board
- Features
The AXIS 82+ Developer Board, which
is 140 x 118 mm has the
following features:
- ETRAX 100LX MCM 4+16
- FLASH: 8 MByte
(4 MB inside the MCM chip)
- RAM: 32
MByte
SDRAM,
32-bit interface (16 MB inside the MCM chip)
-
DUAL Ethernet 10/100 MBit Twisted Pair
- One using the internal full-speed
100MBit controller in the ETRAX chip
- One using a Ethernet-to-USB controller,
thus limiting the theoretical maximum speed to 12MBit (i.e.
the max speed of USB 1.1)
- 2 RS-232 serial ports, 9 pin male D-SUB
(with RX, TX, RTS, CTS, DTR, DSR, CD and RI signals) - 1 RS-485/RS-422 serial port on a screw terminal block
(1
combined RX/TX pair and 1 TX pair)
- Power LED, Eth0 LED,
Eth1 LED
- TEST button
- RESET button
- BOOT button - to enable network boot
- Power: 9-24 V AC (or DC) on a standard connector and on
screw terminal block
- 1 parallel port on pin headers (3.3V, with buffers)
- Full access to system bus and other important pins on ETRAX
- Shipped with Axis embedded Linux port
|
