|
Developer Board for Bluetooth
The Developer Board for Bluetooth, has the following
features:
- ETRAX 100LX,
highly integrated 100MIPS 32bit RISC CPU
- Ethernet 10/100 Mbps Twisted Pair, RJ-45 connector with
integrated magnetics
- 1 RS-232 serial port, 9 pin male D-SUB with RX, TX, RTS,
CTS signals
- 1 Asynchronous serial port with 3.3 V levels, pin header
- 1 Bluetooth module. Alps UGTZ4-121A.
- 1 Bluetooth Antenna
- Power, Radio and Network LEDs
- TEST button - to make a factory default
- BOOT button - to enable network boot
- Power: 9-24 V AC (or DC) on a standard connector and on
screw terminal block
- FLASH: 4 MByte
- RAM: 16 MByte DRAM
- Shipped with Axis
embedded Linux port
Component Reference
The picture below shows the most basic parts of the
Developer Board for Bluetooth and does not include all
components.
Text file with the component reference
(as below)
Axis Developer Board for Bluetooth Component Reference
+-+
| | S3
/---------------------------------------------------++-++--------------+
/ |___| |
/ +------------+ +------+-+
/ | | | X5 |
/ | | +----+ | |
/ | D1 | | D2 | +--------+
/ | | | | |
| +------+ | | +----+ |
| | | +-----+ +-----+ | | +----+
| | | | | | | +------------+ | +-+
| | A1 | | D13 | | D17 | | | |
| | | | | | | | X3 | |
| | | | | | | | | |
| | | +-----+ +-----+ | +-+
| +------+ +----------+ +----+
| +-+ +-+ +-+ | D10 | |
| +-+ +-+ +-+ | | |
| V5 V7 V6 +----------+ |
| |
| +----------+ |
| | D7 | |
| | | |
| +----------+ +----------+ |
\ | | |
\ | A2 | |
\ | | S8 +---+-+
\ | | +--+ | X2 |
\ +----------+ |()| +-----+
\ +--+ |
\----------------------------------------------------------------------+
A1 Bluetooth Base Band Module
A2 Bluetooth Antenna
D1 ETRAX 100LX
D2 Ethernet transciever
D7 8 Mbyte DRAM
D10 8 Mbyte DRAM
D13 2 Mbyte Flash
D17 2 Mbyte Flash
S3 Test button
S8 Boot button
V5 Power LED
V6 Network LED
V7 Radio LED
X2 Power connector (9-15 V AC/DC)
X3 9-pin DSUB, /dev/ttyS0
X5 RJ-45 connector
*Bluetooth is a trademark owned by the Bluetooth SIG,
Inc. USA
|
