MQTT Event Bridge

Description

The MQTT Event Bridge API contains the information and steps that makes it possible to control the bridging of Event Service events and MQTT messages. By using this API, you will be able to configure your Axis device to publish events to an external MQTT broker and convert received MQTT messages to Event Service events.

Model

The API implements event.cgi as its communications interface and supports the following methods:

Method	Description
`configureEventPublication`	Configures the event publishing.
`getEventPublicationConfig`	Returns the event publish configuration.
`configureMqttSubscription`	Configures the MQTT subscription.
`getMqttSubscriptionConfig`	Returns the subscription configuration.
`getSupportedVersions`	Retrieves API versions supported by your product.

Identification

API Discovery: id=event-mqtt-bridge

Common examples

Publish events

Use this example to publish a subset of device events as MQTT messages to the configured broker.

Configure an event publication

Event publications will only be enabled when the filters have been set. These filters can only be applied to topics. Please note that payload filtering is not possible.

Select events to publish.

http://<servername>/axis-cgi/mqtt/event.cgi

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "some context",
  "method": "configureEventPublication",

  "params": {
    "eventFilterList": [
      {
        "topicFilter": "onvif:PTZController/axis:PTZReady"
      },
      {
        "topicFilter": "onvif:Device/axis:IO/VirtualInput"
      },
      {
        "topicFilter": "onvif:Device/axis:Status//."
      }
    ]
  }
}

Parse the JSON response.

Successful response example

{
  "apiVersion": "1.0",
  "context": "some context",
  "method": "configureEventPublication",
  "data": {
  }
}

Error response example

{
  "apiVersion": "1.0",
  "context": "some context",
  "method": "configureEventPublication",
  "error": {
    "code": 1100,
    "message": "Internal Error"
  }
}

API references

configureEventPublication

Get event publication configuration

The event publication configuration can be obtained by making a configuration test. The response will contain the current event publication configuration.

Request the current configuration.

http://<servername>/axis-cgi/mqtt/event.cgi

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "some context",
  "method": "getEventPublicationConfig",
  "params": {
  }
}

Parse the JSON response.

Successful response example

{
  "apiVersion": "1.0",
  "context": "some context",
  "method": "getEventPublicationConfig",
  "data": {
    "eventPublicationConfig": {
      "topicPrefix": "default",
      "customTopicPrefix": "",
      "appendEventTopic": true,
      "includeTopicNamespaces": true,
      "includeSerialNumberInPayload": false,
      "eventFilterList": [
        {
          "topicFilter": "onvif:Device/axis:IO/VirtualPort",
          "qos": 0,
          "retain": "none"
        },
        {
          "topicFilter": "onvif:Device/axis:Status/SystemReady",
          "qos": 0,
          "retain": "none"
        },
        {
          "topicFilter": "onvif:Device/axis:Status//.",
          "qos": 0,
          "retain": "none"
        }
      ]
    }
  }
}

Error response example

{
  "apiVersion": "1.0",
  "context": "some context",
  "method": "getEventPublicationConfig",
  "error": {
    "code": 1100,
    "message": "Internal Error"
  }
}

API references

getEventPublicationConfig

Use this example to activate rules by employing MQTT messages. Please note that MQTT messages published by other clients connected to the same broker can be consumed within the platform. Subscribing to topics through this API means that received messages will be converted to events that can be used to either activate or trigger rules.

Configure MQTT subscription

A subscription is required to enable MQTT message-event conversions. MQTT topic filters are used with an external broker to select incoming MQTT messages. The filters also specify how the messages should be converted to events.

Select incoming MQTT messages.

http://<servername>/axis-cgi/mqtt/event.cgi

JSON input parameters

{
  "apiVersion": "1.1",
  "context": "some context",
  "method": "configureMqttSubscription",
  "params": {
    "mqttFilterList": [
      {
        "topicFilter": "building/A/door/10/opened",
        "qos": 1,
        "isStateData": false
      },
      {
        "topicFilter": "building/A/window/10/state",
        "qos": 0,
        "isStateData": true
      },
      {
        "topicFilter": "building/+/window/#",
        "qos": 1,
        "isStateData": false
      },
    ]
  }
}

Parse the JSON response.

Successful response example

{
  "apiVersion": "1.1",
  "context": "some context",
  "method": "configureMqttSubscription",
  "data": {
  }
}

Error response example

{
  "apiVersion": "1.1",
  "context": "some context",
  "method": "configureMqttSubscription",
  "error": {
    "code": 1100,
    "message": "Internal Error"
  }
}

API references

configureMqttSubscription

Retrieve MQTT subscription configurations

Use this example to retrieve a response containing the current MQTT subscription configurations.

Request the current configuration.

http://<servername>/axis-cgi/mqtt/event.cgi

JSON input parameters

{
  "apiVersion": "1.1",
  "context": "some context",
  "method": "getMqttSubscriptionConfig",
  "params": {
  }
}

Parse the JSON response.

Successful response example

{
  "apiVersion": "1.1",
  "context": "some context",
  "method": "getMqttSubscriptionConfig",
  "data": {
    "mqttSubscriptionConfig": {
      "mqttFilterList": [
        {
          "topicFilter": "building/A/door/10/opened",
          "useDeviceTopicPrefix": false,
          "qos": 1,
          "isStateData": false
        },
        {
          "topicFilter": "building/A/window/10/state",
          "useDeviceTopicPrefix": false,
          "qos": 0,
          "isStateData": true
        },
        {
          "topicFilter": "building/+/window/#",
          "useDeviceTopicPrefix": false,
          "qos": 1,
          "isStateData": false
        }
      ]
    }
  }
}

Error response example

{
  "apiVersion": "1.1",
  "context": "some context",
  "method": "getMqttSubscriptionConfig",
  "error": {
    "code": 1100,
    "message": "Internal Error"
  }
}

API references

getMqttSubscriptionConfig

Get supported versions

Use this example to retrieve a list of API versions supported by your device.

Retrieve a list of supported API versions.

http://<servername>/axis-cgi/mqtt/event.cgi

JSON input parameters

{
  "context": "some context",
  "method": "getSupportedVersions"
}

Parse the JSON response.

Successful response example

{
  "apiVersion": "2.1",
  "context": "some context",
  "method": "getSupportedVersions",
  "data": {
    "apiVersions": ["1.3", "2.1"]
  }
}

Error response example

{
  "apiVersion": "2.1",
  "context": "some context",
  "method": "getSupportedVersions",
  "error": {
    "code": 1100,
    "message": "Internal error"
  }
}

API references

getSupportedVersions

API specifications

configureEventPublication

This API method is used when you want to select events that should be published.

Request

Security level: Admin
Method: POST

http://<servername>/axis-cgi/mqtt/event.cgi

{
  "apiVersion": "1.0",
  "context": "some context",
  "method": "configureEventPublication",
  "params": {
    "topicPrefix": <enum_string>,
    "customTopicPrefix": <string>,
    "appendEventTopic": <boolean>,
    "includeTopicNamespaces": <boolean>,
    "includeSerialNumberInPayload": <boolean>,

    "eventFilterList": [
      {
        "topicFilter": <string>,
        "qos": <integer>,
        "retain": <enum string>
      },
      ...
    ]
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that should be used in the request.
`context`	String	The user sets this value and the application echoes it back in the response (optional).
`method`	String	The operation that should be performed.
`params.topicPrefix`	String	Controls the topic prefix (optional). Possible values are: - `default`: A `{serial number}/event` is used as a prefix. This is the default value. - `custom`: The value provided when the `customTopicPrefix` field is used as the prefix when publishing MQTT messages.
`params.customTopicPrefix`	String	Specifies which custom topic prefix that should be used (optional). If `topicPrefix` is set to `custom`, this parameter will also be required.
`params.appendEventTopic`	String	If this parameter is set to true (its default value), the topic of the event will be appended to the prefix (optional).
`params.includeTopicNamespaces`	Boolean	Specifies if ONVIF topic namespaces should be included in the MQTT message topic (optional). The default value is `true`.
`params.includeSerialNumberInPayload`	Boolean	Specifies if a serial number should be included in the payload message (optional). The default value is `false`.
`params.eventFilterList`	Object list	A list of filters that should be applied on messages originating from the Event system. If a message matches multiple filters it will be published several times.
`params.eventFilterList[].topicFilter`	String	A subscription filter that should be used in the Event system. This filter is based on "Concrete topic expressions" and is specified in the ONVIF code specifications. This kind of filter uses name spaces for its predefined values. Examples: `onvif:Device/axis:Status/SystemReady` `onvif:Device/axis:IO//.` `onvif:RuleEngine/MotionRegionDetector/Motion` `axis:CameraApplicationPlatform/VMD/Camera1ProfileANY`
`params.eventFilterList[].qos`	Integer	A Qos policy that should be used when publishing any event from this filter (optional). Possible values are `0`, `1`, `2`. Default value is `0`.
`params.eventFilterList[].retain`	String	A retain policy that should be used when publishing any event from this filter (optional). Possible values are: - `none`: All messages are sent out as non-retained. This is the default value. - `property`: Events are sent out as non-retained, while property-states are sent out as retained. - `all`: All messages are sent out as retained.

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": <string>,
  "data": {
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used in the request.
`context`	String	The context that was used when the request was made.
`method`	String	The operation that was performed.
`data`	Object	An empty object.

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": <string>,
  "error": {
    "code": <integer>,
    "message": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used in the request.
`context`	String	The context that was used when the request was made.
`method`	String	The operation that was performed.
`error.code`	Integer	The code representing the error that occurred in the request.
`error.message`	Integer	Explains the error that occurred.

Error codes

See General error codes for a complete list of potential error codes for this API.

getEventPublicationConfig

This API method is used when you want to retrieve the event publication configuration.

Request

Security level: Admin
Method: POST

http://<servername>/axis-cgi/mqtt/event.cgi

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": "getEventPublicationConfig"
}

Parameter	Type	Description
`apiVersion`	String	The API version that should be used in the request.
`context`	String	The user sets this value and the application echoes it back in the response (optional).
`method`	String	The operation that should be performed.

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": "getEventPublicationConfig",
  "data": {
    "eventPublicationConfig": {
      "topicPrefix": <enum_string>,
      "customTopicPrefix": <string>,
      "appendEventTopic": <boolean>,
      "includeTopicNamespaces": <boolean>,
      "includeSerialNumberInPayload": <boolean>,

      "eventFilterList": [
        {
          "topicFilter": <string>,
          "qos": <integer>,
          "retain": <enum string>
        },
        ...
      ]
    }
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used in the request.
`context`	String	The context that was used when the request was made.
`method`	String	The operation that was performed.
`data.eventPublicationConfig`	Object	An object containing all options used for event publishing. The structure is the same as in configureEventPublication.

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": <string>,
  "error": {
    "code": <integer>,
    "message": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used in the request.
`context`	String	The context that was used when the request was made.
`method`	String	The operation that was performed.
`error.code`	Integer	The code representing the error that occurred in the request.
`error.message`	Integer	Explains the error that occurred.

Error codes

See General error codes for a complete list of potential error codes for this API.

configureMqttSubscription

This API method is used when you want to select specific MQTT messages.

Request

Security level: Admin
Method: POST

http://<servername>/axis-cgi/mqtt/event.cgi

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": "configureMqttSubscription",
  "params": {
    "mqttFilterList": [
      {
        "topicFilter": <string>,
        "useDeviceTopicPrefix": <boolean>,
        "qos": <integer>,
        "isStateData": <boolean>
      },
      ...
    ]
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that should be used in the request.
`context`	String	The user sets this value and the application echoes it back in the response (optional).
`method`	String	The operation that should be performed.
`params.mqttFilterList`	List	Lists the MQTT topic filters used to subscribe to the external broker. Messages matching the topic filters will be converted to internal events.
`params.mqttFilterList[].topicFilter`	String	An MQTT subscription topic filter that should be used together with the external broker. Please note that `+` and `#` are only allowed for stateless event conversions, i.e. when the `isStateData` is set to false.
`params.mqttFilterList[].useDeviceTopicPrefix`	Boolean	Governs the use of the device topic prefixes on subscriptions (optional). The topic specified as `topicFilter` will be prefixed with the device topic prefix when this parameter is true. The device topic prefix itself is configured as part of the client configuration shown in MQTT client API. Default value is false.
`params.mqttFilterList[].qos`	Integer	The MQTT subscription QoS that should be used together with the external broker (optional). Possible values are 0, 1, 2. Default value is 0.
`params.mqttFilterList[].isStateData`	boolean	Specifies if matching MQTT messages contain state data (optional). Matching incoming messages are converted into stateful (property) events when this parameter is set to true, while messages will be converted to stateless (non-property) events when it is set to false. Possible values: true, false. Default value: false.

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": "configureMqttSubscription",
  "data": {
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used in the request.
`context`	String	The context that was used when the request was made.
`method`	String	The operation that was performed.
`data`	Object	Empty object.

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": <string>,
  "error": {
    "code": <integer>,
    "message": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used in the request.
`context`	String	The context that was used when the request was made.
`method`	String	The operation that was performed.
`error.code`	Integer	The code representing the error that occurred in the request.
`error.message`	Integer	Explains the error that occurred.

Error codes

See General error codes for a complete list of potential error codes for this API.

getMqttSubscriptionConfig

This API method is used when you want to retrieve the current MQTT subscription configuration.

Request

Security level: Admin
Method: POST

http://<servername>/axis-cgi/mqtt/event.cgi

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": "getMqttSubscriptionConfig",
}

Parameter	Type	Description
`apiVersion`	String	The API version that should be used in the request.
`context`	String	The user sets this value and the application echoes it back in the response (optional).
`method`	String	The operation that should be performed.

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": "getMqttSubscriptionConfig",
  "data": {
    "mqttSubscriptionConfig": {
      "mqttFilterList": [
        {
          "topicFilter": <string>,
          "useDeviceTopicPrefix": <boolean>,
          "qos": <integer>,
          "isStateData": <boolean>
        },
        ...
      ]
    }
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used in the request.
`context`	String	The context that was used when the request was made.
`method`	String	The operation that was performed.
`data.mqttSubscriptionConfig`	Object	Contains all subscription options, with a structure similar to the request found in configureMqttSubscription.

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": <string>,
  "error": {
    "code": <integer>,
    "message": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used in the request.
`context`	String	The context that was used when the request was made.
`method`	String	The operation that was performed.
`error.code`	Integer	The code representing the error that occurred in the request.
`error.message`	Integer	Explains the error that occurred.

Error codes

See General error codes for a complete list of potential error codes for this API.

getSupportedVersions

This API method is used when you want to retrieve a list of supported API versions.

Request

Security level: Admin
Method: POST

http://<servername>/axis-cgi/mqtt/event.cgi

{
  "context": <string>,
  "method": "getSupportedVersions"
}

Parameter	Type	Description
`context`	String	The user sets this value and the application echoes it back in the response (optional).
`method`	String	The operation that should be performed.

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": "getSupportedVersions",
  "data": {
    "apiVersions": ["<Major1>.<Minor1>","<Major2>.<Minor2>"]
  }
}

Parameter	Type	Description
`apiVersion`	String	The latest API version.
`context`	String	The context that was used when the request was made (optional).
`method`	String	The operation that was performed.
`data.apiVersions[]=<list of versions>`	String	Specifies the list of supported versions and includes all major versions together with their highest supported minor version.
`<list of versions>`	String	The list of "<Major>.<Minor>" versions e.g. ["1.4", "2.5"].

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": <string>,
  "error": {
    "code": <integer>,
    "message": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used in the request.
`context`	String	The context that was used when the request was made.
`method`	String	The operation that was performed.
`error.code`	Integer	The code representing the error that occurred in the request.
`error.message`	Integer	Explains the error that occurred.

Error codes

See General error codes for a complete list of potential error codes for this API.

General error codes

The error codes for this API are sorted into the following ranges:

1100–1199

Generic errors that are common to many API:s and reserved for server errors, e.g. "Maximum number of configurations reached". The cause can be seen in the server log and the problems can in some cases be solved by restarting the device.

1200–1999

API-specific server errors.

2100–2199

Generic error codes common to many API:s and reserved for client errors, e.g. "Invalid parameter". These errors can be solved by changing the input data to the API.

2200–2999

API-specific client errors. Codes in this range may collide between different API:s.

Code	Description
`1100`	Internal error.
`2100`	API version not supported.
`2101`	Invalid JSON format.
`2102`	Method not supported.
`2103`	Required parameter missing or invalid.
`2104`	Invalid parameter value specified.
`2105`	Authorization failure.
`2106`	Request size too large.

Description​

Model​

Identification​

Common examples​

Publish events​

Configure an event publication​

Get event publication configuration​

Subscribe to MQTT messages​

Configure MQTT subscription​

Retrieve MQTT subscription configurations​

Get supported versions​

API specifications​

configureEventPublication​

getEventPublicationConfig​

configureMqttSubscription​

getMqttSubscriptionConfig​

getSupportedVersions​

General error codes​

Description

Model

Identification

Common examples

Publish events

Configure an event publication

Get event publication configuration

Subscribe to MQTT messages

Configure MQTT subscription

Retrieve MQTT subscription configurations

Get supported versions

API specifications

configureEventPublication

getEventPublicationConfig

configureMqttSubscription

getMqttSubscriptionConfig

getSupportedVersions

General error codes