PIR sensor configuration

The PIR sensor configuration API helps you list and configure the sensitivity of the PIR (passive infrared) sensors on your Axis device.

Overview

The API uses pirsensor.cgi as its communications interface and supports the following methods:

Method	Description
`listSensors`	Lists all available PIR sensors.
`getSensitivity`	Retrieves the sensitivity set for a sensor.
`setSensitivity`	Sets the sensitivity for a sensor.
`getSupportedVersions`	Retrieves a list containing API versions supported by your product.

note

Please note that this API is only applicable on devices with configurable PIR sensors.

Identification

API Discovery: id=pir-sensor-configuration

Common examples

Configure the PIR sensors on a device

These examples will show you how to update the sensitivity of the PIR sensor on your device.

List available PIR sensors

1. Request a listing of the PIR sensors on your device.

http://<servername>/axis-cgi/pirsensor.cgi

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "abc",
  "method": "listSensors"
}

2. Parse the JSON response.

a) Successful response example. This response will list all sensors, and their IDs, on your device. If a sensor supports configurable sensitivity its entry will contain the parameter sensitivityConfigurable with the value true, while the parameter sensitivity will be showing the sensitivity value. Non configurable sensors will not list sensitivity in its entry and will instead contain the parameter sensitivityConfigurable with the value false. The sensor ID is used to identify the specific sensor when implementing or receiving the configured sensitivity.

{
  "apiVersion": "1.0",
  "context": "abc",
  "method": "listSensors",
  "data": {
    "sensors": [
      {
        "id": 0,
        "sensitivityConfigurable": true,
        "sensitivity": 0.05098038911819458
      }
    ]
  }
}

b) Successful response example. This response lists two sensors on the device, one of which is configurable.

{
  "apiVersion": "1.0",
  "context": "abc",
  "method": "listSensors",
  "data": {
    "sensors": [
      {
        "id": 12,
        "sensitivityConfigurable": false
      },
      {
        "id": 7,
        "sensitivityConfigurable": true,
        "sensitivity": 0.05098038911819458
      }
    ]
  }
}

c) Error response example.

{
  "apiVersion": "1.0",
  "context": "abc",
  "method": "listSensors",
  "error": {
    "code": 1100,
    "message": "Internal error"
  }
}

API references

listSensors

Set PIR sensor sensitivity

1. Set the sensitivity value for a PIR sensor.

http://<servername>/axis-cgi/pirsensor.cgi

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "abc",
  "method": "setSensitivity",
  "params": {
    "id": 0,
    "sensitivity": 0.50
  }
}

2. Parse the JSON response.

a) Successful response example.

{
  "apiVersion": "1.0",
  "context": "abc",
  "method": "setSensitivity"
}

b) Error response example.

{
  "apiVersion": "1.0",
  "context": "abc",
  "method": "setSensitivity",
  "error": {
    "code": 2201,
    "message": "Sensor does not have configurable sensitivity"
  }
}

API references

setSensitivity

Retrieve PIR sensor sensitivity

1. Retrieve the configured PIR sensor’s sensitivity.

http://<servername>/axis-cgi/pirsensor.cgi

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "abc",
  "method": "getSensitivity",
  "params": {
    "id": 0
  }
}

2. Parse the JSON response.

a) The response will present you with the configured sensitivity information. Please note that this value may not be exactly the same as the one set with setSensitivity due to the accuracy of your senor’s sensitivity.

{
  "apiVersion": "1.0",
  "context": "abc",
  "method": "getSensitivity",
  "data": {
    "sensitivity": 0.05098038911819458
  }
}

b) Error response example.

{
  "apiVersion": "1.0",
  "context": "abc",
  "method": "getSensitivity",
  "error": {
    "code": 2200,
    "message": "Invalid sensor ID"
  }
}

API references

getSensitivity

API specifications

listSensors

This method should be used when you want to list all PIR sensors on your device.

Request

Security level: Operator
Method: POST

http://<servername>axis-cgi/pirsensor.cgi

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": "listSensors"
}

Parameter	Description
`apiVersion`	The API version that should be used.
`context=<string>`	The user sets this value and the application echoes it back in the response (optional).
`method="listSensors"`	The method that should be used.

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": "listSensors",
  "data": {
    "sensors": [
      {
        "id": <integer>,
        "sensitivityConfigurable": true,
        "sensitivity": <number>
      },
      {
        "id": <integer>,
        "sensitivityConfigurable": false
      }
    ]
  }
}

Parameter	Description
`apiVersion`	The API version that was used in the request.
`context=<string>`	The context set by the user in the request (optional).
`method="listSensors"`	The requested method.
`data.sensors[]`	Lists all sensors along with their features and data.
`data.sensors[].id<int>`	The sensor identifier.
`data.sensors[].sensitivityConfigurable<boolean>`	Indicator for whether the sensor sensitivity can be configured `true` or not `false`.
`data.sensors[].sensitivity<number>`	The sensor’s configured sensitivity, ranging from 0 to 1 (optional).

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": <string>,
  "error": {
    "code": <integer error code>,
    "message": <string>
  }
}

Parameter	Description
`apiVersion`	The API version that was used in the request.
`context=<string>`	The context set by the user in the request (optional).
`method=<string>`	The requested method.
`error.code=<integer error code>`	The error code.
`error.message=<string>`	The error message for the corresponding error code.

Error codes

See General error codes for a complete list of potential errors.

getSensitivity

This method should be used when you want to retrieve the configured sensitivity of a specific sensor.

Request

Security level: Operator
Method: POST

http://<servername>axis-cgi/pirsensor.cgi

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": "getSensitivity"
  "params": {
    "id": <integer>
  }
}

Parameter	Description
`apiVersion`	The API version that should be used.
`context=<string>`	The user sets this value and the application echoes it back in the response (optional).
`method="getSensitivity"`	The method that should be used.
`params`	Parameters retrieved by the method.
`params.id<int>`	The sensor identity getting its sensitivity configured.

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": "getSensitivity",
  "data": {
    "sensitivity": <number>
  }
}

Parameter	Description
`apiVersion`	The API version that was used in the request.
`context=<string>`	The context set by the user in the request (optional).
`method="getSensitivity"`	The requested method.
`data.sensitivity<number>`	The configured sensitivity of the sensor, ranging from 0 to 1.

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": <string>,
  "error": {
    "code": <integer error code>,
    "message": <string>
  }
}

Parameter	Description
`apiVersion`	The API version that was used in the request.
`context=<string>`	The context set by the user in the request (optional).
`method=<string>`	The requested method.
`error.code=<integer error code>`	The error code.
`error.message=<string>`	The error message for the corresponding error code.

Error codes

See General error codes for a complete list of potential errors.

JSON code	Description
`2200`	Invalid sensor id.
`2201`	Sensor does not have configurable sensitivity.

setSensitivity

This method should be used when you want to configure the sensitivity of a specific sensor.

Request

Security level: Operator
Method: POST

http://<servername>axis-cgi/pirsensor.cgi

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": "setSensitivity"
  "params": {
    "id": <integer>,
    "sensitivity": <number>
  }
}

Parameter	Description
`apiVersion`	The API version that should be used.
`context=<string>`	The user sets this value and the application echoes it back in the response (optional).
`method="setSensitivity"`	The method that should be used.
`params`	Parameters retrieved by the method.
`params.id<int>`	The sensor identity getting its sensitivity configured.
`params.sensitivity<number>`	The sensitivity that should be set, ranging from 0 to 1. Please note that the resulting sensitivity may not match the requested value due to the accuracy of the configuration of the sensor and it will be rounded to a supported value. The client can then use `getSensitivity` or `listSensors` to query for the value.

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": "setSensitivity"
}

Parameter	Description
`apiVersion`	The API version that was used in the request.
`context=<string>`	The context set by the user in the request (optional).
`method="setSensitivity"`	The requested method.

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": <string>,
  "error": {
    "code": <integer error code>,
    "message": <string>
  }
}

Parameter	Description
`apiVersion`	The API version that was used in the request.
`context=<string>`	The context set by the user in the request (optional).
`method=<string>`	The requested method.
`error.code=<integer error code>`	The error code.
`error.message=<string>`	The error message for the corresponding error code.

Error codes

See General error codes for a complete list of potential errors.

JSON code	Description
`2200`	Invalid sensor id.
`2201`	Sensor does not have configurable sensitivity.

getSupportedVersions

This method should be used when you want to list all API versions supported by your device.

Request

Security level: Operator
Method: POST

http://<servername>axis-cgi/pirsensor.cgi

{
  "context": <string>,
  "method": "getSupportedVersions"
}

Parameter	Description
`context=<string>`	The user sets this value and the application echoes it back in the response (optional).
`method="getSupportedVersions"`	The method that should be used.

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "context": <string>,
  "method": "getSupportedVersions",
  "data": {
    "apiVersions": [ "<Major1>.<Minor1>", "<Major2>.<Minor2>" ]
  }
}

Parameter	Description
`context=<string>`	The context set by the user in the request (optional).
`method="getSupportedVersions"`	The requested method.
`data.apiVersions[]=<list of versions>`	A list containing all supported major versions along with their highest minor version, e.g. `["1.4", "2.5"]`.

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "<Major>.<Minor>",
  "context": <string>,
  "method": <string>,
  "error": {
    "code": <integer error code>,
    "message": <string>
  }
}

Parameter	Description
`apiVersion`	The API version that was used in the request.
`context=<string>`	The context set by the user in the request (optional).
`method=<string>`	The requested method.
`error.code=<integer error code>`	The error code.
`error.message=<string>`	The error message for the corresponding error code.

Error codes

See General error codes for a complete list of potential errors.

General error codes

JSON code	Description
`1100`	Internal error
`2100`	API version not supported
`2101`	Invalid JSON
`2102`	Method not supported
`2103`	Required parameter missing
`2104`	Invalid parameter value specified

Overview​

Identification​

Common examples​

Configure the PIR sensors on a device​

API specifications​

listSensors​

getSensitivity​

setSensitivity​

getSupportedVersions​

General error codes​

Overview

Identification

Common examples

Configure the PIR sensors on a device

API specifications

listSensors

getSensitivity

setSensitivity

getSupportedVersions

General error codes