Siren and light

Description

The Siren and light API makes it possible to access the light and siren capabilities on an Axis device and use them for either notifications or as deterrents.

Both the siren and the light can be activated with pre-configured patterns and intensity levels, but by using this API, you will be able to configure the presets and create a combination of siren and light patterns yourself. In order to support multiple cases of signaling, the API is also capable of setting priority levels for each request.

Model

The API implements siren_and_light.cgi as its communications interface and supports the following methods:

Method	Description
`getSupportedVersions`	Lists the supported API versions.
`getCapabilities`	Lists all services and their capabilities.
`getStatus`	Lists the current status for a service.
`getProfiles`	Lists the current registered profiles.
`start`	Starts a function for a service.
`stop`	Stops a function for a service.
`addProfile`	Adds a profile to a device.
`removeProfile`	Removes a profile from a device.
`runHealthCheck`	Starts a health check for a later retrieval.
`getLastHealthCheck`	Lists the result from the latest completed health check.
`setMaintenanceMode`	Engages or disengages the maintenance mode for the service.
`uploadProfiles`	Uploads a list of profiles to the device.

Identification

API discovery: id=siren-and-light

Common examples

Activate Siren and light

Use this example to control a device to alert an intruder that they have been discovered by using a combination of sirens and flashing lights.

Deter unwanted people

Request a list of supported API versions.

http://<servername>/axis-cgi/siren_and_light.cgi

JSON input parameters

{
  "context": "my context",
  "method": "getSupportedVersions"
}

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getSupportedVersions",
  "data": {
    "apiVersions": [
      "1.0"
    ]
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getSupportedVersions",
  "error": {
    "code": 1100,
    "message": "Internal error"
  }
}

Use the supported version and request a list of available capabilities:

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "getCapabilities"
}

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getCapabilities",
  "data": {
    "capabilities": {
      "siren": {
        "supportedPatterns": [
          {
            "name": "Siren Alternate",
            "intensity": {
              "poeClass": {
                "3": {
                  "possible": [1, 2, 3, 4, 5],
                  "default": 2
                },
                "4": {
                  "possible": [1, 2, 3, 4, 5],
                  "default": 2
                }
              }
            },
            "priority": {
              "possible": [1, 2, 3, 4, 5, 6, 7, 8, 9, 10],
              "default": 3
            }
          },
          {
            "name": "Alarm Horror",
            "intensity": {
              "poeClass": {
                "3": {
                  "possible": [1, 2, 3, 4, 5],
                  "default": 2
                },
                "4": {
                  "possible": [1, 2, 3, 4, 5],
                  "default": 2
                }
              }
            },
            "priority": {
              "possible": [1, 2, 3, 4, 5, 6, 7, 8, 9, 10],
              "default": 3
            }
          },
          {
            "name": "Alarm Classic Clock",
            "intensity": {
              "poeClass": {
                "3": {
                  "possible": [1, 2, 3, 4, 5],
                  "default": 2
                },
                "4": {
                  "possible": [1, 2, 3, 4, 5],
                  "default": 2
                }
              }
            },
            "priority": {
              "possible": [1, 2, 3, 4, 5, 6, 7, 8, 9, 10],
              "default": 3
            }
          }
        ]
      },
      "light": {
        "supportedPatterns": [
          {
            "name": "Alternate",
            "speed": {
              "possible": [1, 2],
              "default": 1
            },
            "colors": {
              "minNbrColors": 2,
              "maxNbrColors": 4,
              "possible": ["red", "green", "blue", "amber", "white"],
              "default": ["red", "blue"]
            },
            "intensity": {
              "poeClass": {
                "3": {
                  "possible": [1, 2],
                  "default": 2
                },
                "4": {
                  "possible": [1, 2, 3, 4, 5],
                  "default": 2
                }
              }
            },
            "priority": {
              "possible": [1, 2, 3, 4, 5, 6, 7, 8, 9, 10],
              "default": 3
            }
          },
          {
            "name": "Steady",
            "speed": {
              "possible": [1],
              "default": 1
            },
            "colors": {
              "minNbrColors": 1,
              "maxNbrColors": 1,
              "possible": ["red", "green", "blue", "amber", "white"],
              "default": ["red"]
            },
            "intensity": {
              "poeClass": {
                "3": {
                  "possible": [1, 2],
                  "default": 2
                },
                "4": {
                  "possible": [1, 2, 3, 4, 5],
                  "default": 2
                }
              }
            },
            "priority": {
              "possible": [1, 2, 3, 4, 5, 6, 7, 8, 9, 10],
              "default": 3
            }
          },
          {
            "name": "Rotate white + steady color",
            "speed": {
              "possible": [1, 2, 3, 4],
              "default": 2
            },
            "colors": {
              "minNbrColors": 0,
              "maxNbrColors": 1,
              "possible": ["red", "green", "blue", "amber"],
              "default": []
            },
            "intensity": {
              "poeClass": {
                "3": {
                  "possible": [1, 2],
                  "default": 2
                },
                "4": {
                  "possible": [1, 2, 3, 4, 5],
                  "default": 2
                }
              }
            },
            "priority": {
              "possible": [1, 2, 3, 4, 5, 6, 7, 8, 9, 10],
              "default": 3
            }
          }
        ]
      },
      "healthCheckSupport": true,
      "maintenanceModeSupport": true,
      "poeClass": "4"
    }
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getCapabilities",
  "error": {
    "code": 2100,
    "message": "The API version is not supported"
  }
}

Check the device’s status to determine if an alarm is running and for how long.

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getStatus"
}

Parse the JSON response.

Successful response for an idle device

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getStatus",
  "data": {
  }
}

Successful response for a running device

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getStatus",
  "data": {
    "siren": [
      {
        "sirenId": 1,
        "pattern": "Alarm Classic Clock",
        "intensity": 5,
        "durationLeft": 17,
        "priority": 3,
        "profile": "Trespassing"
      }
    ],
    "light": [
      {
        "lightId": 2,
        "pattern": "Alternate",
        "speed": 1,
        "colors": ["blue", "red"],
        "intensity": 1,
        "priority": 5
      },
      {
        "lightId": 1,
        "pattern": "Steady",
        "speed": 1,
        "colors": ["green"],
        "intensity": 1,
        "durationLeft": 12,
        "priority": 1,
        "preset": "Trespassing"
      }
    ]
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getStatus",
  "error": {
    "code": 2101,
    "message": "Invalid JSON format"
  }
}

Initiate the API to start both the siren and light patterns. The siren won’t be on for more than 30 seconds.

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "start",
  "params": {
    "siren": {
      "pattern": "Alarm: Horror",
      "intensity": 5,
      "duration": {
        "unit": "seconds",
        "value": 30
      }
    },
    "light": {
      "pattern": "Alternate",
      "speed": 1,
      "colors": ["blue", "red"],
      "intensity": 1
    }
  }
}

Parse the JSON response.

Successful response.

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "start",
  "data": {
    "sirenId": 1,
    "lightId": 1
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "start",
  "error": {
    "code": 2208,
    "message": "Requested siren duration is invalid"
  }
}

Cancel all operations that are currently running on a service. This example shows you the stop method that lets you end all requested operations, including those with a different priority or were started by a different user.

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "stop",
  "params": {
    "all": ["siren", "light"]
  }
}

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "stop",
  "data": {
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "stop",
  "error": {
    "code": 1203,
    "message": "Requested process id does not exist"
  }
}

API references

Show a notification

Start the service with both the siren and light to run a specified number of repetitions that creates a notification instead of an alarm.

http://<servername>/axis-cgi/siren_and_light.cgi

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "start",
  "params": {
    "siren": {
      "pattern": "Siren: Alternate",
      "intensity": 1,
      "duration": {
        "unit": "repetitions",
        "value": 2
      }
    },
    "light": {
      "pattern": "Rotate white +steady color",
      "speed": 1,
      "intensity": 1,
      "duration": {
        "unit": "repetitions",
        "value": 1
      }
    }
  }
}

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "start",
  "data": {
    "sirenId": 1,
    "lightId": 1
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "start",
  "error": {
    "code": 2208,
    "message": "Requested siren duration is invalid"
  }
}

API references

start

Simple control through profiles

Use this example to define your pattern combinations by using a custom name. Once a profile has been named, the corresponding operation will be marked in the getStatus response with that name.

Customize a profile

Request a list of supported Siren and light protocol versions.

http://<servername>/axis-cgi/siren_and_light.cgi

JSON input parameters

{
  "context": "my context",
  "method": "getSupportedVersions"
}

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getSupportedVersions",
  "data": {
    "apiVersions": [
      "1.0"
    ]
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getSupportedVersions",
  "error": {
    "code": 1100,
    "message": "Internal error"
  }
}

Use the supported version and request a list of profiles:

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getProfiles",
}

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getProfiles",
  "data": {
    "profiles": [
      {
        "name": "Profile 1",
        "description": "This is a description of Profile 1",
        "siren": {
          "pattern": "Alarm: Car alarm",
          "intensity": 5,
          "priority": 3
        },
        "light": {
          "pattern": "Alternate",
          "speed": 1,
          "colors": ["blue", "red"],
          "intensity": 1,
          "duration": {
            "unit": "seconds",
            "value": 30
          },
          "priority": 1
        }
      },
      {
        "name": "Profile 2",
        "light": {
          "pattern": "Alternate",
          "speed": 1,
          "colors": ["blue", "red"],
          "intensity": 1,
          "priority": 1
        }
      },
      {
        "name": "Profile 3",
        "siren": {
          "pattern": "Alarm: Horror",
          "intensity": 1,
          "priority": 3
        }
      }
    ]
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getProfiles",
  "error": {
    "code": 2100,
    "message": "The API version is not supported"
  }
}

Check the responses for the profile name that you wish to replace and request its removal.

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "removeProfile",
  "params": {
    "name": "Profile 1"
  }
}

Parse the JSON response.

Successful request

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "removeProfile",
  "data": {
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "removeProfile",
  "error": {
    "code": 1202,
    "message": "Requested profile is invalid"
  }
}

Add a new profile.

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "addProfile",
  "params": {
    "name": "Profile 1",
    "description": "This is a description of Profile 1",
    "siren": {
      "pattern": "Alarm: Car alarm",
      "intensity": 4
    },
    "light": {
      "pattern": "Pulse",
      "speed": 2,
      "colors": ["blue", "red"],
      "intensity": 1,
      "duration": {
        "unit": "seconds",
        "value": 30
      }
      "priority": 2
    }
  }
}

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "addProfile",
  "data": {
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "addProfile",
  "error": {
    "code": 1202,
    "message": "Requested profile is invalid"
  }
}

API references

Activate Siren and light using a profile

Request a list of supported API versions.

http://<servername>/axis-cgi/siren_and_light.cgi

JSON input parameters

{
  "context": "my context",
  "method": "getSupportedVersions"
}

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getSupportedVersions",
  "data": {
    "apiVersions": [
      "1.0"
    ]
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getSupportedVersions",
  "error": {
    "code": 1100,
    "message": "Internal error"
  }
}

Use the supported version to request a list of available profiles.

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getProfiles"
}

Parse the JSON response.

Successful response example

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getProfiles",
  "data": {
    "profiles": [
      {
        "name": "Profile 1",
        "description": "This is a description of Profile 1",
        "siren": {
          "pattern": "Alarm: Car alarm",
          "intensity": 5,
          "priority": 3
        },
        "light": {
          "pattern": "Alternate",
          "speed": 1,
          "colors": ["blue", "red"],
          "intensity": 1,
          "duration": {
            "unit": "seconds",
            "value": 30
          },
          "priority": 1
        }
      },
      {
        "name": "Profile 2",
        "light": {
          "pattern": "Alternate",
          "speed": 1,
          "colors": ["blue", "red"],
          "intensity": 1,
          "priority": 1
        }
      },
      {
        "name": "Profile 3",
        "siren": {
          "pattern": "Alarm: Horror",
          "intensity": 1,
          "priority": 3
        }
      }
    ]
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getProfiles",
  "error": {
    "code": 2100,
    "message": "The API version is not supported"
  }
}

Check the responses for the profile that you wish to activate.

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "start",
  "params": {
    "profile": "Profile 1"
  }
}

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "start",
  "data": {
    "sirenId": 1,
    "lightId": 1
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "start",
  "error": {
    "code": 1202,
    "message": "Requested profile is invalid"
  }
}

If necessary, request the present status with getStatus.

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getStatus"
}

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getStatus",
  "data": {
    "siren": [
      {
        "sirenId": 1,
        "pattern": "Alarm: Classic clock",
        "intensity": 5,
        "priority": 3,
        "profile": "Profile 1"
      }
    ],
    "light": [
      {
        "lightId": 1,
        "pattern": "Alternate",
        "speed": 1,
        "colors": ["blue", "red"],
        "intensity": 1,
        "durationLeft": 28,
        "priority": 1,
        "profile": "Profile 1"
      }
    ]
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getStatus",
  "error": {
    "code": 2101,
    "message": "Invalid JSON format"
  }
}

Once a profile has fulfilled its purpose, you can use stop to halt it. This can be done even if the operation ID is unknown.

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "stop",
  "params": {
    "profile": "Profile 1"
  }
}

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "stop",
  "data": {
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "stop",
  "error": {
    "code": 1203,
    "message": "Requested process id does not exist"
  }
}

API references

Advanced control through priorities

Use this example to signal multiple events with different input sources. Priorities are used to guarantee that the device return the appropriate state.

If an active service receive a request to activate a function it will evaluate the service based on its priority number, where a higher number equals a higher priority. The service will respond in one of three ways:

The requested operation won’t become active if it has a lower priority than the running operation.
The requested operation will replace the running operation if they have the same priority.
The running operation will be on standby until a requested operation with a higher priority is either stopped or paused
Both Health check and the maintenance mode are able to halt a service, even when it has a higher priority. See getStatus for additional information.

Operations with a specified runtime will count down even when they are not the highest priority.

In this example a device has been configured to show the availability of a conference room and signal when a phone is ringing. If the room is available the service will be displayed in green and red when it is occupied. When the phone is ringing, the service will pause, show the state of the room and sound the siren as well as flashing with a white light. When the phone is answered or stops ringing the service will continue to show the availability of the conference room.

Multiple requests with different priorities

Use a supported version and request a list of service capabilities.

http://<servername>/axis-cgi/siren_and_light.cgi

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getCapabilities"
}

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getCapabilities",
  "data": {
    "capabilities": {
      "siren": {
        "supportedPatterns": [
          {
            "name": "Siren: Alternate",
            "intensity": {
              "poeClass": {
                "3": {
                  "possible": [1, 2, 3, 4, 5],
                  "default": 2
                },
                "4": {
                  "possible": [1, 2, ,3, 4, 5],
                  "default": 2
                }
              }
            },
            "priority": {
              "possible": [1, 2, 3, 4, 5, 6, 7, 8, 9, 10],
              "default": 3
            }
          },
          {
            "name": "Alarm: Horror",
            "intensity": {
              "poeClass": {
                "3": {
                  "possible": [1, 2, 3, 4, 5],
                  "default": 2
                },
                "4": {
                  "possible": [1, 2, 3, 4, 5],
                  "default": 2
                }
              }
            },
            "priority": {
              "possible": [1, 2, 3, 4, 5, 6, 7, 8, 9, 10],
              "default": 3
            }
          },
          {
            "name": "Alarm: Classic Clock",
            "intensity": {
              "poeClass": {
                "3": {
                  "possible": [1, 2, 3],
                  "default": 1
                },
                "4": {
                  "possible": [1, 2, 3, 4, 5],
                  "default": 1
                }
              }
            },
            "priority": {
              "possible": [1, 2, 3, 4, 5, 6, 7, 8, 9, 10],
              "default": 3
            }
          }
        ]
      },
      "light": {
        "supportedPatterns": [
          {
            "name": "Alternate",
            "speed": {
              "possible": [1, 2],
              "default": 1
            },
            "colors": {
              "minNbrColors": 2,
              "maxNbrColors": 4,
              "possible": ["red", "green", "blue", "amber", "white"],
              "default": ["red", "blue"]
            },
            "intensity": {
              "poeClass": {
                "3": {
                  "possible": [1, 2],
                  "default": 2
                },
                "4": {
                  "possible": [1, 2, 3, 4, 5],
                  "default": 2
                }
              }
            },
            "priority": {
              "possible": [1, 2, 3, 4, 5, 6, 7, 8, 9, 10],
              "default": 3
            }
          },
          {
            "name": "Steady",
            "speed": {
              "possible": [1],
              "default": 1
            },
            "colors": {
              "minNbrColors": 1,
              "maxNbrColors": 1,
              "possible": ["red", "green", "blue", "amber", "white"],
              "default": ["red"]
            },
            "intensity": {
              "poeClass": {
                "3": {
                  "possible": [1, 2],
                  "default": 2
                },
                "4": {
                  "possible": [1, 2, 3, 4, 5],
                  "default": 2
                }
              }
            },
            "priority": {
              "possible": [1, 2, 3, 4, 5, 6, 7, 8, 9, 10],
              "default": 3
            }
          },
          {
            "name": "Rotate white + steady color",
            "speed": {
              "possible": [1, 2, 3, 4],
              "default": 2
            },
            "colors": {
              "minNbrColors": 0,
              "maxNbrColors": 1,
              "possible": ["red", "green", "blue", "amber"],
              "default": []
            },
            "intensity": {
              "poeClass": {
                "3": {
                  "possible": [1, 2],
                  "default": 2
                },
                "4": {
                  "possible": [1, 2, 3, 4, 5],
                  "default": 2
                }
              }
            },
            "priority": {
              "possible": [1, 2, 3, 4, 5, 6, 7, 8, 9, 10],
              "default": 3
            }
          }
        ]
      },
      "healthCheckSupport": true,
      "maintenanceModeSupport": true,
      "poeClass": "4"
    }
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getCapabilities",
  "error": {
    "code": 2100,
    "message": "The API version is not supported"
  }
}

Use the lowest priority on the list to show the availability of a conference room.

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "start",
  "params": {
    "light": {
      "pattern": "Steady",
      "speed": 1,
      "colors": ["green"],
      "intensity": 1,
      "priority": 1
    }
  }
}

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "start",
  "data": {
    "lightId": 1
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "start",
  "error": {
    "code": 1205,
    "message": "Requested light priority is invalid"
  }
}

Use the highest priority on the list to check for a ringing phone.

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "start",
  "params": {
    "siren": {
      "pattern": "Alarm: Classic Clock",
      "intensity": 3
    },
    "light": {
      "pattern": "Alternate",
      "intensity": 5,
      "priority": 10
    }
  }
}

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "start",
  "data": {
    "sirenId": 1,
    "lightId": 2
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "start",
  "error": {
    "code": 1205,
    "message": "Requested light priority is invalid"
  }
}

Cancel the running light operation when the phone is answered by using the stop method and the ID of the intended operation. Operations with a higher or lower priority will be kept.

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "stop",
  "params": {
    "sirenId": 1,
    "lightId": 2
  }
}

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "stop",
  "data": {
  }
}

Failed response if a given process ID isn't running:

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "stop",
  "error": {
    "code": 1203,
    "message": "Requested process id does not exist"
  }
}

Verify that the requested behavior has been successfully acquired.

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getStatus"
}

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getStatus",
  "data": {
    "light": [
      {
        "lightId": 1,
        "pattern": "Steady",
        "speed": 1,
        "colors": ["green"],
        "intensity": 1,
        "priority": 1
      }
    ]
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getStatus",
  "error": {
    "code": 2101,
    "message": "Invalid JSON format"
  }
}

API references

Verifying operational conditions with a health check

Use this example to make sure that the unit is fully operational by initiating a health check. The health check will run through the service capabilities and create a report.

Initiate a health check

Run a health check on a given device.

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "runHealthCheck"
}

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "runHealthCheck",
  "data": {
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "runHealthCheck",
  "error": {
    "code": 1204,
    "message": "Service does not support health check"
  }
}

The health check will take a couple of seconds to run, after which you will receive the result.

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getLastHealthCheck"
}

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getLastHealthCheck",
  "data": {
    "timestamp": "2020-01-13T09:03:26+00:00",
    "errors": [
      {
        "code": 101,
        "message": "Light is not working optimal"
      },
      {
        "code": 102,
        "message": "Siren is not working optimal"
      }
    ]
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getLastHealthCheck",
  "error": {
    "code": 1204,
    "message": "Service does not support health check"
  }
}

API references

Set the device to maintenance mode

Use this example to move the unit to a different location without disabling the systems that may trigger an alarm, which is useful for when you want to access a specific device and put it in maintenance mode and approach it without the risk of the siren going off.

Toggle the maintenance mode

Engage maintenance mode for a service that will automatically disengage after one hour.

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "setMaintenanceMode",
  "params": {
    "maintenanceMode": true,
    "duration": 3600
  }
}

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "setMaintenanceMode",
  "data": {
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "setMaintenanceMode",
  "error": {
    "code": 1205,
    "message": "Service does not support maintenance mode"
  }
}

API references

setMaintenanceMode

Upload new profiles

Use this example to upload a configured profile to more than one device, thus replacing the pre-existing profiles on that device.

Copying profiles from one unit to another

Get the list of the profiles configuration.

http://<servername>/axis-cgi/siren_and_light.cgi

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getProfiles"
}

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getProfiles",
  "data": {
    "profiles": [
      {
        "name": "Profile 1",
        "description": "This is a description of Profile 1",
        "siren": {
          "pattern": "Alarm: Car alarm",
          "intensity": 5,
          "priority": 3
        },
        "light": {
          "pattern": "Alternate",
          "speed": 1,
          "colors": ["blue", "red"],
          "intensity": 1,
          "duration": {
            "unit": "seconds",
            "value": 30
          },
          "priority": 1
        }
      },
      {
        "name": "Profile 2",
        "light": {
          "pattern": "Alternate",
          "speed": 1,
          "colors": ["blue", "red"],
          "intensity": 1,
          "priority": 1
        }
      },
      {
        "name": "Profile 3",
        "siren": {
          "pattern": "Alarm: Horror",
          "intensity": 1,
          "priority": 3
        }
      }
    ]
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "getProfiles",
  "error" {
    "code": 2100,
    "message": "The API version is not supported"
  }
}

Create a multipart/form-data request consisting of two parts where the first part shall supply the JSON body and shall have the field name=request in its header. The second part should include a file with the list of profiles to upload and shall have the field name=file in its header.

a) Part 1:

JSON input parameters

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "uploadProfiles",
  "params": {
    "uploadMode": "erase_and_add"
  }
}

b) Part 2:

File content

[
  {
    "name": "Profile 1",
    "description": "This is a description of Profile 1",
    "siren": {
      "pattern": "Alarm: Classic Clock",
      "intensity": 5,
      "priority": 3
    },
    "light": {
      "pattern": "Alternate",
      "speed": 1,
      "colors": ["blue", "red"],
      "intensity": 1,
      "duration": {
        "unit": "seconds",
        "value": 30
      },
      "priority": 1
    }
  },
  {
    "name": "Profile 2",
    "light": {
      "pattern": "Alternate",
      "speed": 1,
      "colors": ["blue", "red"],
      "intensity": 1,
      "priority": 1
    }
  },
  {
    "name": "Profile 3",
    "siren": {
      "pattern": "Alarm: Horror",
      "intensity": 1,
      "priority": 3
    }
  }
]

Parse the JSON response.

Successful response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "uploadProfiles",
  "data": {
  }
}

Failed response

{
  "apiVersion": "1.0",
  "context": "my context",
  "method": "uploadProfiles",
  "error": {
    "code": 1202,
    "message": "Requested profile is invalid"
  }
}

API references

uploadProfiles

API specification

getSupportedVersions

This API method can be used to retrieve a list of supported major API versions along with their highest supported minor version.

Request

Security level: admin, operator
Method: POST
Content-Type: application/json

http://<servername>/axis-cgi/siren_and_light.cgi

JSON input parameters

{
  "context": <string>,
  "method": "getSupportedVersions"
}

Parameter	Type	Description
`context`	String	The user sets this value and the application echoes it back in the response (optional).
`method`	String	The method that should be used.

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "<Major2.Minor2>",
  "context": <string>,
  "method": "getSupportedVersions",
  "data": {
    "apiVersions": ["<Major1>.<Minor1>", "<Major2>.<Minor2>"]
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The method that was performed.
`data`	JSON object	Container for response specific parameters.
`apiVersions`	Array	The supported API versions presented in the format "Major.Minor".

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "getSupportedVersions",
  "error": {
    "code": <integer error code>,
    "message": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The performed method.
`code`	Integer	The error code.
`message`	String	The error message corresponding to the error code.

Error codes

See Error codes for a list of potential errors.

getCapabilities

This API method can be used to list all supported capabilities.

Request

Security level: admin, operator
Method: POST

http://<servername>/axis-cgi/siren_and_light.cgi

JSON input parameters

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "getCapabilities",
}

Parameter	Type	Description
`apiVersion`	String	The requested API version in the format "Major.Minor".
`context`	String	The user sets this value and the application echoes it back in the response (optional).
`method`	String	The method that should be used.

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "getCapabilities",
  "data": {
    "capabilities": {
      "siren": {
        "supportedPatterns": [
          {
            "name": <string>,
            "intensity": {
              "poeClass": {
                "3": {
                  "possible": <array>,
                  "default": <integer>
                },
                "4": {
                  "possible": <array>,
                  "default": <integer>
                }
              }
            },
            "priority": {
              "possible": <array>,
              "default": <integer>
            }
          },
          {
            "name": <string>,
            "intensity": {
              "poeClass": {
                "3": {
                  "possible": <array>,
                  "default": <integer>
                },
                "4": {
                  "possible": <array>,
                  "default": <integer>
                }
              }
            },
            "priority": {
              "possible": <array>,
              "default": <integer>
            }
          }
        ]
      },
      "light": {
        "supportedPatterns": [
          {
            "name": <string>,
            "speed": {
              "possible": <array>,
              "default": <integer>
            }
            "colors": {
              "minNbrColors": <integer>,
              "maxNbrColors": <integer>
              "possible": <array>,
              "default": <integer>
            },
            "intensity": {
              "poeClass": {
                "3": {
                  "possible": <array>,
                  "default": <integer>
                },
                "4": {
                  "possible": <array>,
                  "default": <integer>
                }
              }
            },
            "priority": {
              "possible": <array>,
              "default": <integer>
            }
          },
          {
            "name": <string>,
            "colors": {
              "minNbrColors": <integer>,
              "maxNbrColors": <integer>,
              "possible": <array>,
              "default": <integer>
            },
            "intensity": {
              "poeClass": {
                "3": {
                  "possible": <array>,
                  "default": <integer>
                },
                "4": {
                  "possible": <array>,
                  "default": <integer>
                }
              }
            },
            "priority": {
              "possible": <array>,
              "default": <integer>
            }
          }
        ]
      },
      "healthCheckSupport": <boolean>,
      "maintenanceModeSupport": <boolean>,
      "poeClass": <string>
    }
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used, presented in the format Major.Minor.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The method that was performed.
`data`	JSON object	Container for the method specific parameters listed below.
`capabilities`	Array	Supported services. Parameters listed below.
Siren-specific parameters
`siren`	JSON object	Object containing the supported siren properties. This parameter must be supplied if siren is supported.
`supportedPatterns`	Array	Object containing the properties for the siren patterns.
`name`	String	Name of the siren pattern. This parameter must be supplied if siren is supported.
`intensity`	JSON object	Object containing the supported intensity.
`poeClass`	JSON object	Object containing the poe class dependent properties that must contain the poe variable supported by the device.
`3`	JSON object	Object containing the supported intensity properties for POE class 3.
`possible`	Array	Contains the siren intensity levels when powered by POE class 3.
`default`	Integer	The intensity level used when the pattern is started without a set intensity level.
`4`	JSON object	Object containing the supported intensity properties for POE class 4.
`possible`	Array	Contains the siren intensity levels when powered by POE class 4.
`default`	Integer	The intensity level used when the pattern is started without a set intensity level.
`priority`	JSON object	Object containing the supported priority properties.
`possible`	Array	Contains the priority levels.
`default`	Integer	Priority level used when the pattern is started without a set priority level.
Light-specific parameters
`light`	JSON object	Object containing the supported light properties. This parameter must be supplied if light is supported.
`supportedPatterns`	Array	Contains the properties of the light patterns.
`name`	String	The name of the pattern that must be supplied if light is supported.
`speed`	JSON object	Contains the supported speeds for the light pattern.
`colors`	JSON object	Object containing the supported color properties.
`minNbrColors`	Integer	The minimum number of different colors that are required for the light pattern.
`maxNbrColors`	Integer	The maximum number of different colors that are required for the light pattern. The maximum length of the color array should be set at the start of this pattern.
`possible`	Array	Contains the names of supported colors in which specified light pattern can flash.
`default`	Array	Contains the names of supported colors used when the pattern is started without a pre-set color.
`intensity`	JSON object	Object containing the supported intensity properties.
`poeClass`	JSON object	Object containing the poe class dependent properties that must contain the poe variable supported by the device.
`3`	JSON object	Object containing the supported intensity properties for POE class 3.
`possible`	Array	Contains the siren intensity levels when powered by POE class 3.
`default`	Integer	The intensity level used when the pattern is started without a set intensity level.
`4`	JSON object	Object containing the supported intensity properties for POE class 4.
`possible`	Array	Contains the siren intensity levels when powered by POE class 4.
`default`	Integer	The intensity level used when the pattern is started without a set intensity level.
`priority`	JSON object	Object containing the supported priority properties.
`possible`	Array	Contains the priority levels.
`default`	Integer	Priority level used when the pattern is started without a set priority level.
`healthCheckSupport`	Boolean	True if the service supports health check.
`maintenanceModeSupport`	Boolean	True if the service supports maintenance mode.
`poeClass`	String	The current POE class.

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "getCapabilities",
  "error": {
    "code": <integer>,
    "message": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The performed method.
`code`	Integer	The error code.
`message`	String	The error message corresponding to the error code.

Error codes

See Error codes for a list of potential errors.

getStatus

This API method can be used to list the current status for a given ID. Please note that priorities with a value of 11 and above are reserved for service functions.

Function	Priority
Maintenance mode	11
Find my device	12
Health check	13

Request

Security level: Admin, operator
Method: POST

http://<servername>/axis-cgi/siren_and_light.cgi

JSON input parameters

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "getStatus"
}

Parameter	Type	Description
`apiVersion`	String	The requested API version in the format "Major.Minor".
`context`	String	The user sets this value and the application echoes it back in the response (optional).
`method`	String	The method that should be used.

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "getStatus",
  "data": {
    "siren": [
      {
        "sirenId": <string>,
        "pattern": <string>,
        "intensity": <string>,
        "durationLeft": <integer>,
        "priority": <string>,
        "profile": <string>
      },
      {
        "sirenId": <string>,
        "pattern": <string>,
        "intensity": <string>,
        "durationLeft": <integer>,
        "priority": <string>,
        "profile": <string>
      }
    ],
    "light": [
      {
        "lightId": <string>,
        "pattern": <string>,
        "speed": <integer>,
        "colors": <array>,
        "intensity": <string>,
        "durationLeft": <integer>,
        "priority": <string>,
        "profile": <string>
      },
      {
        "lightId": <string>,
        "pattern": <string>,
        "speed": <integer>,
        "colors": <array>,
        "intensity": <string>,
        "durationLeft": <integer>,
        "priority": <string>,
        "profile": <string>
      }
    ]
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used, presented in the format Major.Minor.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The method that was performed.
`data`	JSON object	Container for the method specific parameters listed below.
Siren-specific parameters
`siren`	JSON object	An object containing the supported siren properties.
`sirenId`	String	The siren ID.
`pattern`	String	The name of the siren pattern currently running.
`intensity`	Integer	The intensity level of the siren pattern currently running.
`durationLeft`	Integer	The time left until the siren stops (in seconds). This value decreases even when there are other active patterns with higher priority.
`profile`	String	The name of the profile currently running.
`priority`	Integer	The priority level used to start the pattern.
Light-specific parameters
`light`	JSON object	An object containing the supported light properties.
`lightId`	String	The light ID.
`pattern`	String	The name of the light pattern currently running.
`speed`	Integer	The speed for the running light pattern.
`colors`	Array	Contains the names of the colors which is used with the corresponding light pattern.
`intensity`	Integer	The intensity level of the light pattern currently running.
`durationLeft`	Integer	The time left until the light stops (in seconds). This value decreases even when there are other active patterns with higher priority.
`profile`	String	The name of the profile currently running.
`priority`	Integer	The priority level used to start the pattern.

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "getStatus",
  "error": {
    "code": <integer>,
    "message": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The performed method.
`code`	Integer	The error code.
`message`	String	The error message corresponding to the error code.

Error codes

See Error codes for a list of potential errors.

getProfiles

This API method can be used to list the profiles for a given ID.

Request

Security level: Admin, operator
Method: POST

http://<servername>/axis-cgi/siren_and_light.cgi

JSON input parameters

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "getProfiles"
}

Parameter	Type	Description
`apiVersion`	String	The requested API version in the format "Major.Minor".
`context`	String	The user sets this value and the application echoes it back in the response (optional).
`method`	String	The method that should be used.

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "getProfiles",
  "data": {
    "profiles": [
      {
        "name": <string>,
        "description": <string>,
        "siren": {
          "pattern": <string>,
          "intensity": <string>,
          "duration": {
            "unit": <string>,
            "value": <integer>
          },
          "priority": <integer>
        },
        "light": {
          "pattern": <string>,
          "speed": <integer>,
          "colors": <array>,
          "intensity": <string>,
          "duration": {
            "unit": <string>,
            "value": <integer>
          },
          "priority": <integer>
        }
      },
      {
        "name": <string>,
        "siren": {
          "pattern": <string>,
          "intensity": <string>,
          "duration": {
            "unit": <string>,
            "value": <integer>
          }
          "priority": <integer>
        },
        "light": {
          "pattern": <string>,
          "speed": <integer>,
          "colors": <array>,
          "intensity": <string>,
          "duration": {
            "unit": <string>,
            "value": <integer>
          }
          "priority": <integer>
        }
      }
    ]
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used, presented in the format Major.Minor.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The method that was performed.
`data`	JSON object	Container for the method specific parameters listed below.
`profiles`	Array	An array of JSON objects that describes the registered profiles (conditional).
`name`	String	The name of the profile. Used as a unique identifier.
`description`	String	String supplied by the user that can be no longer than 250 characters (optional).
Siren-specific parameters
`siren`	JSON object	Contains supported siren properties.
`pattern`	String	The name of the siren pattern.
`intensity`	Integer	The intensity level of the siren pattern.
`duration`	JSON object	Contains the duration information.
`unit`	String	The unit used for the duration. Can be set in either seconds or repetitions.
`value`	Integer	The value used for the duration.
`priority`	Integer	The priority level used for when to start the pattern.
Light-specific parameters
`light`	JSON object	Contains the supported light properties.
`pattern`	String	The name of the light pattern.
`speed`	Integer	The speed of the light pattern.
`colors`	Array	Contains the name of the colors which are used by the light pattern.
`intensity`	Integer	The intensity level of the light pattern.
`duration`	JSON object	Contains the duration information.
`unit`	String	The unit used for the duration. Can be set in either seconds or repetitions.
`value`	Integer	The value used for the duration.
`priority`	Integer	The priority level used for when to start the pattern.

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "getProfiles",
  "error": {
    "code": <integer>,
    "message": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The performed method.
`code`	Integer	The error code.
`message`	String	The error message corresponding to the error code.

Error codes

See Error codes for a list of potential errors.

start

This API method can be used to send a request that will initiate the service. Depending on the state and priority of the requested operation, it will either be active or stored to be activated later. The service will run the operation with the highest priority while the runtime of the inactive operation will decrease when it is not shown or heard. Only one operation per priority level is stored, which means that you will need to issue a start with an identical priority level to replace a stored or active operation.

A start can be used to specify the variable preset, meaning either the siren, the light or both.
A start will return an ID for each initiated operation, which in turn can be used to stop that operation.

Request

Security level: Admin, operator
Method: POST

http://<servername>/axis-cgi/siren_and_light.cgi

JSON input parameters

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": start,
  "params": {
    "siren": {
      "pattern": <string>,
      "intensity": <integer>,
      "duration": {
        "unit": <string>,
        "value": <integer>
      }
      "priority": <integer>
    },
    "light": {
      "pattern": <string>,
      "speed": <integer>,
      "colors": <array>,
      "intensity": <string>,
      "duration": {
        "unit": <string>,
        "value": <integer>
      },
      "priority": <integer>
    },
    "profile": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The requested API version in the format "Major.Minor".
`context`	String	The user sets this value and the application echoes it back in thee response (optional).
`method`	String	The method that should be used.
`params`	JSON object	Container for method specific parameters.
Siren-specific parameters
`siren`	JSON object	Contains the siren properties. Can not be used together with profile (optional).
`pattern`	String	The name of the siren pattern.
`intensity`	String	The name of the siren intensity level.
`duration`	Integer	Contains the duration information.
`unit`	String	The unit used for the duration. Can be set in either seconds or repetitions.
`value`	Integer	The value used for the duration.
`priority`	String	The name of the priority level (optional).
Light-specific parameters
`light`	JSON object	Contains light properties. Can not be used together with profile (optional).
`pattern`	String	The name of the light pattern. Must be supplied if a light is used.
`speed`	Integer	The speed that the light pattern should use (optional).
`colors`	Array	Contains the names of colors in which the light pattern are able to flash (optional).
`intensity`	String	The name of the light intensity level.
`duration`	Integer	The duration time in seconds when the light should self terminate.
`unit`	String	The unit used for the duration. Can be set in either seconds or repetitions.
`value`	Integer	The value used for the duration.
`priority`	String	The name of the priority level (optional).
`profile`	String	The name of the preset, used as unique identifiers. It can not be used together with siren or light (optional).

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "start",
  "data": {
    "sirenId": <integer>,
    "lightId": <integer>
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The method that was performed.
`data`	JSON object	Container for response specific parameters.
`sirenId`	Integer	The ID of the siren operation, used as a handle to stop this operation.
`lightId`	Integer	The ID of the light operation, used as a handle to stop this operation.

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "start",
  "error": {
    "code": <integer error code>,
    "message": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The performed method.
`code`	Integer	The error code.
`message`	String	The error message corresponding to the error code.

Error codes

The table below lists the error codes that can be returned for this method. See Error codes for a list of general errors.

Code	Description
`1202`	Requested profile is invalid
`2200`	Requested siren pattern is invalid
`2201`	Requested light pattern is invalid
`2202`	Requested siren intensity is invalid
`2203`	Requested light intensity is invalid
`2204`	Requested siren priority is invalid
`2205`	Requested light priority is invalid
`2206`	Requested siren duration unit is invalid
`2207`	Requested light duration unit is invalid
`2208`	Requested siren duration is invalid
`2209`	Requested light duration is invalid
`2210`	Requested function type is invalid
`2211`	Requested number of colors is invalid
`2212`	Requested color is invalid
`2215`	Requested speed is invalid.

stop

This API method can be used to cancel the whole or parts of the API using one out of three parameter options:

all: stops all operations.
sirenId or lightId: stops either the siren or the light. This also initiate operations with lower priorities.
profile: stops operations started by a profile.

Request

Security level: Admin, operator
Method: POST

http://<servername>/axis-cgi/siren_and_light.cgi

JSON input parameters

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "stop",
  "params": {
    "sirenId": <integer>,
    "lightId": <integer>,
    "all": <array>,
    "profile": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The requested API version in the format "Major.Minor".
`context`	String	The user sets this value and the application echoes it back in the response (optional).
`method`	String	The method that should be used.
`params`	JSON object	Container for method specific parameters.
`sirenId`	Integer	The ID handle for the stop siren operation (optional).
`lightId`	Integer	The ID handle for the stop light operation (optional).
`all`	Array	States the operation that should be stopped. This might stop multiple requests with different priorities. Supported types are `siren` and `light` (optional).
`profile`	String	The name of the stop profile. The name is used as an unique identifier for profiles (optional).

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "stop",
  "data": {
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used, presented in the format Major.Minor.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The method that was performed.
`data`	JSON object	Container for the method specific parameters listed below.

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "stop",
  "error": {
    "code": <integer error code>,
    "message": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The performed method.
`code`	Integer	The error code.
`message`	String	The error message corresponding to the error code.

Error codes

The table below lists the error codes that can be returned for this method. See Error codes for a list of general errors.

Code	Description
`1202`	Requested profile is invalid
`1203`	Requested process id does not exist
`2210`	Requested function type is invalid

addProfile

This API method can be used to add a new profile to the API.

Request

Security level: Admin, operator
Method: POST

http://<servername>/axis-cgi/siren_and_light.cgi

JSON input parameters

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "addProfile",
  "params": {
    "name": <string>,
    "description": <string>,
    "siren": {
      "pattern": <string>,
      "intensity": <string>,
      "duration": {
        "unit": <string>,
        "value": <integer>
      },
      "priority": <string>
    },
    "light": {
      "pattern": <string>,
      "speed": <integer>,
      "colors": <array>,
      "intensity": <string>,
      "duration": {
        "unit": <string>,
        "value": <integer>
      },
      "priority": <string>
    }
  }
}

Parameter	Type	Description
`apiVersion`	String	The requested API version in the format "Major.Minor".
`context`	String	The user sets this value and the application echoes it back in the response (optional).
`method`	String	The method that should be used.
`params`	JSON object	Container for method specific parameters.
`name`	String	The profile name, which must be unique as it also functions as an identifier. Can’t be longer than 50 character.
`description`	String	Supplied by the user. Can’t be longer than 250 characters (optional).
Siren-specific parameters
`siren`	JSON object	Contains the siren configuration (optional).
`pattern`	String	The name of the siren pattern.
`intensity`	Integer	The siren intensity level.
`duration`	JSON object	Contains the duration information.
`unit`	String	The duration unit. Can be either seconds or repetitions.
`value`	Integer	The duration value. Valid ranges are 0–259200 for seconds and 0–20 for repetitions.
`priority`	Integer	The priority level (optional).
Light-specific parameters
`light`	JSON object	Contains the light configuration (optional).
`pattern`	String	The name of the light pattern.
`speed`	Integer	The speed that the light pattern should use (optional).
`colors`	Array	Contains the names of the colors the light pattern should flash in (optional).
`intensity`	Integer	The light intensity level.
`duration`	JSON object	Contains the duration information (optional).
`unit`	String	The duration unit. Can be either seconds or repetitions.
`value`	Integer	The duration value. Valid ranges are 0–259200 for seconds and 0–20 for repetitions.
`priority`	Integer	The priority level (optional).

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "addProfile",
  "data": {
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The method that was performed.
`data`	JSON object	Container for response specific parameters.

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "addProfile",
  "error": {
    "code": <integer>,
    "message": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The performed method.
`code`	Integer	The error code.
`message`	String	The error message corresponding to the error code.

Error codes

The table below lists the error codes that can be returned for this method. See Error codes for a list of general errors.

Code	Description
`1201`	Maximum number of profiles reached
`1202`	Requested profile is invalid
`2200`	Requested siren pattern is invalid
`2201`	Requested light pattern is invalid
`2202`	Requested siren intensity is invalid
`2203`	Requested light intensity is invalid
`2204`	Requested siren priority is invalid
`2205`	Requested light priority is invalid
`2206`	Requested siren duration unit is invalid
`2207`	Requested light duration unit is invalid
`2208`	Requested siren duration is invalid
`2209`	Requested light duration is invalid
`2210`	Requested function type is invalid
`2211`	Requested number of colors is invalid
`2212`	Requested color is invalid
`2213`	Profile name is too long
`2214`	Description is too long
`2215`	Requested speed is invalid.

removeProfile

This API method can be used to remove an existing profile from your device.

Request

Security level: Admin, operator
Method: POST

http://<servername>/axis-cgi/siren_and_light.cgi

JSON input parameters

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "removeProfile",
  "params": {
    "name": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The requested API version in the format "Major.Minor".
`context`	String	The user sets this value and the application echoes it back in thee response (optional).
`method`	String	The method that should be used.
`params`	JSON object	Container for method specific parameters.
`name`	String	The name of the preset that should be removed.

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "removeProfile",
  "data": {
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The method that was performed.
`data`	JSON object	Container for response specific parameters.

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "removeProfile",
  "error": {
    "code": <integer>,
    "message": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The performed method.
`code`	Integer	The error code.
`message`	String	The error message corresponding to the error code.

Error codes

The table below lists the error codes that can be returned for this method. See Error codes for a list of general errors.

Code	Description
`1202`	Requested profile is invalid

runHealthCheck

This API method can be used to start a health check for a later retrieval. A health check will take some time to run, meaning that the result will take some time to appear.

Request

Security level: admin, operator
Method: POST

http://<servername>/axis-cgi/siren_and_light.cgi

JSON input parameter

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "runHealthCheck"
}

Parameter	Type	Description
`apiVersion`	String	The requested API version in the format "Major.Minor".
`context`	String	The user sets this value and the application echoes it back in the response (optional).
`method`	String	The method that should be used.

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "runHealthCheck",
  "data": {
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The method that was performed.
`data`	JSON object	Container for response specific parameters.

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "runHealthCheck",
  "error": {
    "code": <integer>,
    "message": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The performed method.
`code`	Integer	The error code.
`message`	String	The error message corresponding to the error code.

Error codes

The table below lists the error codes that can be returned for this method. See Error codes for a list of general errors.

Code	Description
`1204`	Service does not support health check

getLastHealthCheck

This API method can be used to retrieve the results from the latest completed health check.

Request

Security level: admin, operator
Method: POST

http://<servername>/axis-cgi/siren_and_light.cgi

JSON input parameters

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": getLastHealthCheck"
}

Parameter	Type	Description
`apiVersion`	String	The requested API version in the format "Major.Minor".
`context`	String	The user sets this value and the application echoes it back in thee response (optional).
`method`	String	The method that should be used.

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "getLastHealthCheck",
  "data": {
    "timestamp": "iso 8601 timestamp",
    "errors": [
      {
        "code": <integer>,
        "message": "First error message"
      },
      {
        "code": <integer>,
        "message": "Second error message"
      }
    ]
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The method that was performed.
`data`	JSON object	Container for response specific parameters.
`timestamp`	String	The timestamp for the latest ran health check.
`errors`	Array	Contains the error json-objects.
`code`	Integer	The error code from the health check.
`message`	String	A message describing the error.

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "getLastHealthCheck",
  "error": {
    "code": <integer>,
    "message": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The performed method.
`code`	Integer	The error code.
`message`	String	The error message corresponding to the error code.

Error codes

The table below lists the error codes that can be returned for this method. See Error codes for a list of general errors.

Code	Description
`1204`	Service does not support health check

setMaintenanceMode

This API method can be used to enable or disable maintenance mode. A device in maintenance mode is safe approach without an alarm going off as the state will be stored and kept though a reboot.

Request

Security level: admin, operator
Method: POST

http://<servername>/axis-cgi/siren_and_light.cgi

JSON input parameters

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "setMaintenanceMode",
  "params": {
    "maintenanceMode": <boolean>,
    "duration": <integer>
  }
}

Parameter	Type	Description
`apiVersion`	String	The requested API version in the format "Major.Minor".
`context`	String	The user sets this value and the application echoes it back in thee response (optional).
`method`	String	The method that should be used.
`params`	JSON object	Container for method specific parameters.
`maintenanceMode`	Boolean	The state for maintenance mode. `True`= engages `False`= disengages
`duration`	Integer	The number of seconds the maintenance mode will be active if `True` has been chosen (optional).

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "setMaintenanceMode",
  "data": {
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The method that was performed.
`data`	JSON object	Container for response specific parameters.

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "setMaintenanceMode",
  "error": {
    "code": <integer>,
    "message": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The performed method.
`code`	Integer	The error code.
`message`	String	The error message corresponding to the error code.

Error codes

The table below lists the error codes that can be returned for this method. See Error codes for a list of general errors.

Code	Description
`1205`	Service does not support maintenance mode

uploadProfiles

This API method can be used to upload a set of profiles to the device.

One part of the multipart/form-data request shall supply the body and have the field name=request in its header. Another part shall supply the actual file to upload using the field name=file and refer to the file using the field filename=profiles in its header. The file should be a text file with the profiles listed in a JSON array, with the items specified in the same manner as in the addProfile method.

The new profiles may be uploaded in one of three modes, specified by the parameter uploadMode.

Mode	Description
`add`	Add a profile. If a profile with an identical name exists, an error will be returned.
`overwrite`	Add a profile. If a profile with an identical name exists, the old profile will be removed and replaced.
`erase_and_add`	Remove all pre-existing profiles before uploading a new one.

Request

Security level: admin, operator
Method: POST
Content-type

multipart/form-data

http://<servername>/axis-cgi/siren_and_light.cgi

Part 1

Content-disposition

form-data; name="request"
Content-Type: application/json

JSON input parameters

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "uploadProfiles",
  "params": {
    "uploadMode": <string>
  }
}

Part 2

Content-disposition

form-data; name="file"; filename="<profile-file>"

File content

[
  {
    "name": "Name of first profile",
    "description": "Description of the profile",
    "siren": {
      "pattern": "Name of siren pattern",
      "intensity": <integer>,
      "duration": {
        "unit": <string>,
        "value": <integer>
      },
      "priority": <integer>
    },
    "light": {
      "pattern": "Name of the light pattern",
      "speed": <integer>,
      "colors": <array>,
      "intensity": <string>,
      "duration": {
        "unit": <string>,
        "value": <integer>
      },
      "priority": <integer>
    }
  },
  {
    "name": "Name of seconds profile"
    "description": "Description of the profile",
    "siren": {
      "pattern": <string>,
      "intensity": <integer>,
      "duration": {
        "unit": <string>,
        "value": <integer>
      },
      "priority": <integer>
    },
    "light": {
      "pattern": "Name of light pattern",
      "speed": <integer>,
      "colors": <array>,
      "intensity": <integer>,
      "duration": {
        "unit": <string>,
        "value": <integer>
      },
      "priority": <integer>
    }
  }
]

Parameter	Type	Description
`apiVersion`	String	The requested API version in the format "Major.Minor".
`context`	String	The user sets this value and the application echoes it back in thee response (optional).
`method`	String	The method that should be used.
`params`	JSON object	Container for method specific parameters.
`uploadMode`	String	Specifies how the new profiles should be uploaded. Valid values are `add`, `overwrite` and `erase_and_add`

Return value - Success

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "uploadProfiles",
  "data": {
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The method that was performed.
`data`	JSON object	Container for response specific parameters.

Return value - Failure

HTTP Code: 200 OK
Content-Type: application/json

Response body syntax

{
  "apiVersion": "Major.Minor",
  "context": <string>,
  "method": "uploadProfiles",
  "error": {
    "code": <integer>,
    "message": <string>
  }
}

Parameter	Type	Description
`apiVersion`	String	The API version that was used.
`context`	String	A text string that will be echoed back as long as it was provided by the user in the corresponding request (optional).
`method`	String	The performed method.
`code=<integer error code>`	Integer	The error code.
`message=<string>`	String	The error message corresponding to the error code.

Error codes

The table below lists the error codes that can be returned for this method. See Error codes for a list of general errors.

Code	Description
`1201`	Maximum number of profiles reached
`1202`	Requested profile is invalid
`2200`	Requested siren pattern is invalid
`2201`	Requested light pattern is invalid
`2202`	Requested siren intensity is invalid
`2203`	Requested light intensity is invalid
`2204`	Requested siren priority is invalid
`2205`	Requested light priority is invalid
`2206`	Requested siren duration unit is invalid
`2207`	Requested light duration unit is invalid
`2208`	Requested siren duration is invalid
`2209`	Requested light duration is invalid
`2210`	Requested function type is invalid
`2211`	Requested number of colors is invalid
`2212`	Requested color is invalid
`2213`	Profile name is too long
`2214`	Description is too long
`2215`	Requested speed is invalid.

Error codes

The following tables lists the errors that can occur for any API method. Method specific errors are listed under in their separate API specifications.

Code	Description
`1100`	Internal error
`1200`	Service is not initialized
`2100`	The API version is not supported
`2101`	Invalid JSON
`2102`	Method not supported
`2103`	Required parameter missing
`2104`	Invalid parameter value specified

Description​

Model​

Identification​

Common examples​

Activate Siren and light​

Deter unwanted people​

Show a notification​

Simple control through profiles​

Customize a profile​

Activate Siren and light using a profile​

Advanced control through priorities​

Multiple requests with different priorities​

Verifying operational conditions with a health check​

Initiate a health check​

Set the device to maintenance mode​

Toggle the maintenance mode​

Upload new profiles​

Copying profiles from one unit to another​

API specification​

getSupportedVersions​

getCapabilities​

getStatus​

getProfiles​

start​

stop​

addProfile​

removeProfile​

runHealthCheck​

getLastHealthCheck​

setMaintenanceMode​

uploadProfiles​

Error codes​

Description

Model

Identification

Common examples

Activate Siren and light

Deter unwanted people

Show a notification

Simple control through profiles

Customize a profile

Activate Siren and light using a profile

Advanced control through priorities

Multiple requests with different priorities

Verifying operational conditions with a health check

Initiate a health check

Set the device to maintenance mode

Toggle the maintenance mode

Upload new profiles

Copying profiles from one unit to another

API specification

getSupportedVersions

getCapabilities

getStatus

getProfiles

start

stop

addProfile

removeProfile

runHealthCheck

getLastHealthCheck

setMaintenanceMode

uploadProfiles

Error codes